European Union - English 
Netherlands (Nederland / België) - Nederlands 
Sweden (Sverige) - Svenska
x
Through flow heaters are developed for water or water-based liquids. IHP’s through flow heaters are manufactured in acid-resistant stainless steel AISI 316L (1.4404). We offer four different power classes so that you can choose the surface load that suits your liquid best. By equipping the heater with baffles, we create a so-called sinus wave of turbulent flowing liquid, which gives a higher efficiency in the heating. The system can be used for both direct and circulation heating.
The temperature control, that is included in the complete heating system, holds amounts of intelligence that come in handy when you need even heating, ramp functionality, adjustable maximum temperature, program steps with ramp and set point or only when you need temperature control that is CE marked and approved.
The stainless steel through flow heater can be mounted horizontally on the floor or vertically on the wall and the circulating or flowing liquid is connected via the inlet and outlet of the heater.
IHP can also help with installation and preventive maintenance.
| Material acid-resistant stainless steel AISI 316L (1.4404) | |
| Temperature area 0-90°C | |
| Power 2000W, 3000W, 6000W, 9000W | |
| Supply 230V 1-phase or 400V 3-phase | |
| Length 1137mm | |
| Width 135mm | |
| Height 215mm | |
| Surface load adjusted to heat water based liquids | |
| Integrated PT100 sensor | |
| Max pressure 6 Bar | |
| Cable between heater and control unit about 2800mm | |
| Digital programmable regulator | |
| Rubber cable 1,6m with grounded plug type Schucko / Industrial CEE 400V male plug | |
| RCD not included (IHP assumes that the 230V/400V 16A socket is protected by RCD) | |
| CE manual |
| Article number | Dimension | Power | Supply | Surface load | |
| 60-16689-2 | 1137 x 135 x 230mm | 2000W | 230V | 1,50 W/cm² | |
| 60-16689-3 | 1137 x 135 x 230mm | 3000W | 230V | 2,27 W/cm² | |
| 60-16689-6 | 1137 x 135 x 230mm | 6000W | 400V 3-fas | 4,53 W/cm² | |
| 60-16689-9 | 1137 x 135 x 230mm | 9000W | 400V 3-fas | 6,79 W/cm² |
| Article number | Description | |
| 220-IP65-230V | IP65 for humid environments and outdoor use | |
| 220-IP65-400V | IP65 for humid environments and outdoor use |
IHP delivers heating systems, control systems and industrial services to many leading industrial companies in Europe. As a partner and supplier we are known for our flexibility and our high quality. Together we create successful long-term relations.
Hällebergsvägen 5
SE-443 60 Stenkullen
Sweden
Monday to Friday 08:00-16:30
Saturday and Sunday closed
E-mail: info@ihpheating.com
Switch: +46 (0)31 795 30 30
Fax: +46 (0)31 795 30 39
x
Company name (mandatory field) *
Contact person (mandatory field) *
Email (mandatory field) *
Message (mandatory field) *
