>> Providing an efficient heating system our container heating jackets are ideal for reducing the viscosity of a variety of products including fats, oils and foodstuffs, to enable the decanting of the product into smaller containers or process lines.
Used throughout the world by a multitude of industries from pharmaceutical to chemical, cosmetic to food, container heater is the ideal solution for heating liquid materials stored in intermediate bulk containers.
Unlike expensive conventional ovens, the heater jacket allows the IBC to be heated at its point of use. Once heated the IBC can be moved with the jacket in position and still maintain the temperature for longer. Thanks to the high efficiency thermal insulation. With 1000 Watts per zone and optional insulation lid the heater jacket offers a cost effective way of heating IBC’s.
The heater jacket is suitable for all types of IBC and has quick release adjustable buckles for ease installation and removal. It´s designed with upper and lower heat zones, each with separate thermostatic control. This allows for the upper heating zone to be switched off once the content level has fallen below half way.
The heating element of the IBC container heater is stitched into an insulated jacket made from a water resistant material, Teflon / Polyester. It´s insulated with a stitched blanket of needled silica glass.
The heating element is shielded with a tinned copper earth braid for safety. All heaters are supplied with 4 metres of braided power cable and fitted with either a 0-40 °C or 0-90 °C capillary thermostat. Available on 2 circuits each 1000 watts, 110 volts or 230 volts AC.
▲ Adjustable thermostat, 0 to + 40 ° or 0 to + 90 ° C
▲ Adjustable straps are used to secure the jacket quick and easy.
▲ We can customize our heaters and label it with your own information and logo.
All container heaters are manufactured to conform to the EEC low voltage and EMC directives and CE marked accordingly. It is advised that power to the heater jacket be disconnected when the container is either empty or being filled, or upon installation or removal of the heater itself. It is recommended that the unit be operated in a dry environment with the container vented to avoid build up of internal pressure.
|Power Rating||110 or 230 Volts / 2 circuits each 1000 Watts|
|Temperature control||0-40 °C or 0-90 °C (adjustable)|
|Supply Lead||4 Meters flexible armoured|
|Jacket Material||Heated Face – Polyester base fabric. Teflon coated. Outer face – 1100 deitex texturized|
|Insulation||Glass filament blanket|
|Element||Silicone insulated spiral wound resistance element|
|Fixing||Nylon webbing with quick release adjustable buckles|
|Size||1000 x 4400 mm (3900 mm heated length)|
|Performance||Water temperature goes from 15-80 °C in 56 hours with insulation lid.|
|IHP part no.||Rating||Thermostat||Drum size|
|30-HIBC-21-40||2000 W, 230 V||0-40 °C||1000 Liters|
|30-HIBC-21-90||2000 W, 230 V||0-90 °C||1000 Liters|
|30-HIBC-22-40||2000 W, 110 V||0-40 °C||1000 Liters|
|30-HIBC-22-90||2000 W, 110 V||0-90 °C||1000 Liters|
|30-HIBC-L||Lid to suit