Contact us directly at +46 (0)31-795 30 30 or info@ihpheating.com
Start > Products > Heated Hoses

PRODUCTS A-Z

Heated Hoses

Heated Hoses

Heated Hoses – Data Sheet

Heated Hoses

>> Heated hoses are the ideal solution for any kind of transportation containing liquids or gases or other substances without heat loss. The heated hose technique is determined by desired temperature, power, application and outer protection material.

Gas and other substances are channelled from the measurement point to the analysis instrument in the analysis technique, i.e. in trash burning ovens, refineries, chemical industry, and motor exhaust analysis, etc.

For these applications the gases are to be freeze protected, protected against condensation, or guarantee for constant temperatures up to 250°C. Higher temperatures are available on request.

Design

All our heated hoses are constructed using the highest quality materials and are designed to be flexible and strong. They are able to withstand high temperatures and pressures. All our heated hoses are sheathed with heating elements and contain temperature probes to ensure the fluid viscosity is maintained over long distances.

  • Flexible constructions
  • Good temperature stability and heat distribution
  • Bespoke manufacture to customers specification or existing pattern
  • Built to withstand high temperatures and pressures
  • Suitable for liquid and gas transfer

Web Inquiry

Spam Protection
Enter a number between one and nine! (required field) *




All our heated hoses are constructed using the highest quality materials and are designed to be flexible and strong.

 
 
Heated hoses can be used in hazardous areas under certain considerations. For Ex-area applications please contact our engineering department.

 

General application areas
  • Frost protection for different media
  • Maintenance of liquids or gases at working temperature
  • Medium transportation of high viscosity materials in a fluid state
  • Medium transportation where certain temperatures are essential
  • Prevention of condensation
  • Transportation of gas samples from the measurement point to an analyzer

 

Application examples
  • Analysis measurement
  • Bitumen processing equipment
  • Filling machines
  • Food processing equipment
  • Heavy fuel oil systems
  • Heavy oil processing equipment
  • Hot melt machines
  • Insulated glass machinery
  • Packaging equipment
  • PolyuretMale foaming equipment
  • Wax processing equipment

 

Technical specification
Operating voltage Typically 115V to 440V or other on request
Maximum operating temperature 600°C
Temperature probes Thermocouple thermistors, PT100, RT120
Tube diameter Typically 1mm to 55mm or higher on request
Inner Tube PTFE Tube smooth bore or convoluted with up to 6 layers of stainless steel over braiding. We also do stainless steel convoluted cores.
Heating element Spiral wound resistive heating element
Thermal insulation Silicon sponge closed cell for up to 220°C and for higher temperatures nomex up to 600°C
Maximum length Approx. 21 meters
Lead length Made to suit customer, standard length 2m
End fittings Virtually any industry standard end fitting can be supplied depending on inner Tubee diameter
Maximum operating pressure Customer specific
End fittings
End fitting DKR Female sealing head

End fitting DKR Female sealing head

DN (mm) Thread G  
4 G 1/8″ 28 G 1/4″ 19
6 G 1/4″ 19  
8 G 3/8″ 19  
10 G 3/8″ 19 G 1/2″ 14
12 G 1/2″ 14 G 5/8″ 14
16 G 3/4″ 14  
20 G 1″ 11  
25 G 1″ 11 G 1 1/4″ 11
32 G 1 1/4″ 11 G 1 1/2″ 11
40 G 1 1/2″ 11  

 

End fitting RSS/RSL Pipe

End fitting RSS/RSL Pipe

DN (mm) RSL RSS
L (mm) d (mm) L (mm) d (mm)
4 25 6 27 8
6 25 8 29 10
8 26 10 29 12
10 26 12 29 14
12 28 15 33 16
16 30 18 39 20
20 32 22 44 25
25 30 28 44 30
32 35 35 41 38
40 38 42    

 

End fitting DKL/DKM/DKS, Female

End fitting DKL/DKM/DKS, Female

DN (mm) Thread DKL DKM DKS
4 12×1.5    
6 14×1.5   18×1.5
8 16×1.5   20×1.5
10 18×1.5   22×1.5
12 22×1.5   24×1.5
16 26×1.5   30×2
20 30×2 30×1.5 36×2
25 36×2 38×1.5 42×2
32 45×2 45×1.5 52×2
40 52×2 52×1.5  

 

End fitting DKJ, Female

End fitting DKJ, Female

DN (mm) Thread, UNF
4 7/16″ -20
6 1/2″-20
6 9/16″-18
8 9/16″-18
10 3/4″-16
13 3/4″-16
13 7/8″-14
16 7/8″-14
16 1 1/16″-12
20 1 1/16″-12
25 1 5/16″-12
32 1 5/8″-12
40 1 7/8″-12

 

End fitting BDN Female

End fitting BDN Female

DN mm G=thread/inch DKL DKM DKS
4 1/8” – 28” 12×1.5    
6 1/4” – 19 14×1.5   18×1.5
8 3/8” – 19 16×1.5   20×1.5
10 3/8” – 19 18×1.5   22×1.5
12 1/2” – 14 22×1.5   24×1.5
16 3/4” – 14 26×1.5   30×2
20 1” – 11 30×2 30×1.5 36×2
25 1” – 11 36×2 38×1.5 42×2
32 1 1/4” – 11 45×2 45×1.5 52×2
40 1 1/2” – 11 52×2 52×1.5  

 

IHP works together with many leading industrial companies in Europe. As a partner and supplier, we are known for our flexibility and our high quality products and services. IHP has a business valued model and creates successful long-term relationships.

clients

IHP AB

Hällebergsvägen 5
SE-443 60 Stenkullen
Sweden

   Switch:
   Fax:
   E-mail:
   Skype:
+46 (0)31 795 30 30
+46 (0)31 795 30 39
info@ihpheating.com
ihpmeeting
Opening Hours
Monday 07:30-16:00
Tuesday 07:30-16:00
Wednesday 07:30-16:00
Thursday 07:30-16:00
Friday 07:30-16:00
Saturday Closed
Sunday Closed

Copyright © IHP AB 2005-2018. All rights reserved.
Sitemap

Our offices