>> Our base drum heater is specially designed for melting or reducing the viscosity of substances such as soap, fats, waxes, varnishes and various oil-based products.
If you require a faster heat up time or a higher heat output, the base drum heater can be used in combination with a drum heater and / or with an insulation jacket.
The conical heater plate means that the drum can be securely and easily placed on the heater. The plate has a high temperature coating and is made of 2 mm thick steel plate for added rigidity. The construc-tion makes it possible to use different sizes of drums up to 200 litres. The integrated Temperature Controller indicates both power and load. Heat is supplied via a silicone insulated foil element that gives an even temperature of the entire surface of the plate. The Base heater is insulated with 50 mm mineral wool which reduces heat transfer to the base.
All base drum heaters are manufactured to conform to the EEC low voltage and EMC directives and CE marked accordingly. It is advised that power to the heater be disconnected when the container is either empty or being filled, or upon installation or removal of the drum. It is recommended that the unit be operated in a dry environment with the container vented to avoid build up of internal pressure.
|Power Rating||110 or 230 Volts / 900 Watts|
|Temperature control||0-150 °C|
|Supply Lead||2 Meters flexible armoured|
|Platen||Height: 70 mm
Diameter top: 550 mm
Base: 600 mm
|Control Unit||Height: 105 mm
Protrusion: 280 mm
|Overall Unit||Long: 880 mm
Wide: 600 mm
High: 105 mm
|IHP part no.||Drum size||Drum size|
|30-HBD-1||900 W, 230 V||200 Liter|
|30-HBD-2||900 W, 110 V||200 Liter|